Draeger Drager 6510 Breathalyser

Details

TECHNICAL SPECIFICATIONS

• Principle of measurement Electrochemical DrägerSensor in 1/4” technology; alcohol-specific
• Measurement range 0 to 2.5 mg/L; if measurement range limit is exceeded, a message is displayed
• Sampling Standard: automatic sampling when minimum volume is reached
• Passive sampling without mouthpiece or manual initiation of sampling possible
• Ready for use approx. 6 s after switching on
• Display of measurement result after approx. 3 s (at 0 mg/L); after approx. 10 s (at 0.5 mg/L, room temperature)
• Operating temperature -5 to +50 °C / 23 to 122 °F
• Humidity 10 to 100 %RH, non-condensing
• Ambient pressure 600 to 1,400 hPa / 17.7 to 41.3 inch Hg
• Display Graphic backlit LCD display; 41 mm x 24 mm / 1.6” x 0.9” (128 x 64 pixels)
• LED 3-colour, to support display and warning messages
• Audible signal Different signal tones to support display messages and warnings
• Datalogger Storage of last 10 tests with test numbers
• Power supply Two AA batteries. Charge status displayed
• approx. 1,500 breath tests can be performed on one set of batteries
• Mouthpiece adaption Slide’n’click mouthpiece attachment. Can be fitted for right or left orientation
• Mouthpiece Hygienically, individually packaged, with tamper-proof, non-obstructable air outlet,
• mouthpiece ejector and spacer between mouth and instrument housing
• Operating concept Measurement functions can be performed using just one key; menu navigation is via two menu keys
• Calibration Wet gas or dry gas calibration
• Housing Impact resistant ABS/PC
• Size, weight approx. 140 mm x 70 mm x 30 mm / 5.5” x 2.8” x 1.2”, approx. 195 g / 0.5 lbs, incl. batteries
• Instrument configuration Direct menu-guided configuration of instrument settings (PIN required)
• No additional PC software needed
• Vibration and shock Conforms to EN 60068-2-6, EN 60068-2-29
• CE marking Directive 89/336/EC (electromagnetic compatibility)