Skip to Store Area:

Alcoscan Alcosense Andatech Breathalysers

Australian Breathalyser Alcohol Breath Tester Analyser Specialist - Alcoscan Online Store

You're currently on:

  • Draeger Drager 6510 Breathalyser
Search Site
Draeger Drager 6510 Breathalyser

More Views

Draeger Drager 6510 Breathalyser

Be the first to review this product

Share/Bookmark

Availability: In stock.

$ 979.00
Add Items to Cart Add to Cart

Quick Overview

This is the Breathalyser used by the Police.

Hand-held instrument for quick and accurate breath alcohol analysis. Sampling is controlled by a microprocessor. The electrochemical sensor (fuel cell) reacts fast and specificly to alcohol. Full text messages on the graphic display and 3 LED colours simplify the operator guidance. Depending on customer requirements the result can be shown in different measuring units. Storage of the last 10 measured values.By using the test numbers single measuring results can be selected and shown on the display. Power supply with 2 alkaline batteries (AA cells).



This is the Breathalyser used by the Police.

 

The Dräger Alcotest 6510 offers you:

  • Pocket size
  • short response times also in case of high alcohol concentrations enable a fast display of the measuring result
  • Easy to handle one-button operation for measuring functions
  • Automatic procedures for sampling, menu operations, calibration
  • Intuitive menu guidance due to 2 menu buttons
  • patented mouthpiece adaption enables fast and secure attachment also in dark environment or by not trained persons
  • Non-closable air-exhaust at mouthpiece, no manipulation of breath sample possible
  • Distancer at the mouthpiece avoids contact of the test person‘s lipt to the instrument housing
  • Optimized 1/4" DrägerSensor reacts specifically to alcohol
  • Interaction results via display, LED and beeper signals
  • backlit graphic display with full text messages easy to understand
  • 2 AA cells enable > 1500 breath alcohol tests
  • Suitable for right-/left-handed persons
  • Instrument design creates a distance between the hand of the operator and the mouth of the test person (separation of grip area and area for breath sampling)


Content of delivery: instrument, 3 mouthpieces, 2 batteries and handstrap in plastic case.

Specification

TECHNICAL SPECIFICATIONS

  • Principle of measurement Electrochemical DrägerSensor in 1/4” technology; alcohol-specific
  • Measurement range 0 to 2.5 mg/L; if measurement range limit is exceeded, a message is displayed
  • Sampling Standard: automatic sampling when minimum volume is reached
  • Passive sampling without mouthpiece or manual initiation of sampling possible
  • Ready for use approx. 6 s after switching on
  • Display of measurement result after approx. 3 s (at 0 mg/L); after approx. 10 s (at 0.5 mg/L, room temperature)
  • Operating temperature -5 to +50 °C / 23 to 122 °F
  • Humidity 10 to 100 %RH, non-condensing
  • Ambient pressure 600 to 1,400 hPa / 17.7 to 41.3 inch Hg
  • Display Graphic backlit LCD display; 41 mm x 24 mm / 1.6” x 0.9” (128 x 64 pixels)
  • LED 3-colour, to support display and warning messages
  • Audible signal Different signal tones to support display messages and warnings
  • Datalogger Storage of last 10 tests with test numbers
  • Power supply Two AA batteries. Charge status displayed
  • approx. 1,500 breath tests can be performed on one set of batteries
  • Mouthpiece adaption Slide’n’click mouthpiece attachment. Can be fitted for right or left orientation
  • Mouthpiece Hygienically, individually packaged, with tamper-proof, non-obstructable air outlet,
  • mouthpiece ejector and spacer between mouth and instrument housing
  • Operating concept Measurement functions can be performed using just one key; menu navigation is via two menu keys
  • Calibration Wet gas or dry gas calibration
  • Housing Impact resistant ABS/PC
  • Size, weight approx. 140 mm x 70 mm x 30 mm / 5.5” x 2.8” x 1.2”, approx. 195 g / 0.5 lbs, incl. batteries
  • Instrument configuration Direct menu-guided configuration of instrument settings (PIN required)
  • No additional PC software needed
  • Vibration and shock Conforms to EN 60068-2-6, EN 60068-2-29
  • CE marking Directive 89/336/EC (electromagnetic compatibility)